Volume 11 Issue 4
Oct.  2018
Turn off MathJax
Article Contents
Xin-guang Yang, En-di Zhai, Yuan Wang, Zhong-bo Hu. 2018: A comparative study of pseudo-static slope stability analysis using different design codes. Water Science and Engineering, 11(4): 310-317. doi: 10.1016/j.wse.2018.12.003
Citation: Xin-guang Yang, En-di Zhai, Yuan Wang, Zhong-bo Hu. 2018: A comparative study of pseudo-static slope stability analysis using different design codes. Water Science and Engineering, 11(4): 310-317. doi: 10.1016/j.wse.2018.12.003

A comparative study of pseudo-static slope stability analysis using different design codes

doi: 10.1016/j.wse.2018.12.003
Funds:  This work was supported by the National Key R&D Program of China (Grant No. 2017YFC0404804) and the National Natural Science Foundation of China (Grant No. 51509019).
More Information
  • Corresponding author: Xin-guang Yang
  • Received Date: 2017-11-03
  • Rev Recd Date: 2018-07-11
  • Many researchers have developed new calculation methods to analyze seismic slope stability problems, but the conventional pseudo-static method is still widely used in engineering design due to its simplicity. Based on the Technical Code for Building Slope Engineering (GB 50330―2013) of China and the Guidelines for Evaluating and Mitigating Seismic Hazards in California (SP117), a comparative study on the pseudo-static method was performed. The results indicate that the largest difference between these two design codes lies in determination of the seismic equivalence reduction factor (feq). The GB 50330―2013 code specifies a single value for feq of 0.25. In SP117, numerous factors, such as magnitude and distance, are considered in determining feq. Two case studies show that the types of slope stability status evaluated by SP117 are in agreement with those evaluated by the seismic time-history stability analysis and Newmark displacement analysis. The factors of safety evaluated by SP117 can be used in practice for safe design. However, the factors of safety evaluated by GB 50330―2013 are risky for slope seismic design.

     

  • loading
  • Abrahamson, N.A., Silva, W.J., 1996. Empirical Ground Motion Models. Brookhaven National Laboratory, New York.
    Baker, R., Shukha, R., Operstein, V., Frydman, S., 2006. Stability charts for pseudo-static slope stability analysis. Soil Dynamics and Earthquake Engineering, 26(9), 813–823. https://doi.org/10.1016/j.soildyn.2006.01.023.
    Blake, T.F., Hollingsworth, R.A., Stewart, J.P., 2002. Recommended Procedures for Implementation of DMG Special Publication 117 Guidelines for Analyzing and Mitigating Landslide Hazards in California. Southern California Earthquake Center, Los Angeles.
    Bray, J.D., Rathje, E.M., 1998. Earthquake-induced displacements of solid-waste landfills. Journal of Geotechnical and Geoenvironmental Engineering, 124(3), 242–253. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:3(242).
    Bray, J.D., Rathje, E.M., Augello, A.J., Merry, S.M., 1998. Simplified seismic design procedure for geosynthetic-lined, solid-waste landfills. Geosynthetics International, 5(1–2), 203–235. https://doi.org/10.1680/gein.5.0119.
    California Geological Survey (CGS). 2008. Guidelines for Evaluating and Mitigating Seismic Hazards in California, Special Publication 117A. CGS, Sacramento.
    European Committee for Standardisation (ECS), 2004. Eurocode 8: Design of Structures for Earthquake Resistance, Part 5: Foundations, Re-taining Structures and Geotechnical Aspects. European Standard EN 1998-5.
    Han, Z., Su, H.Z., Li, H., 2018. Simulation analysis of seismic response for a dam considering seepage force. Advances in Science and Technology of Water Resources, 38(2),70–76. https://doi.org/10.3880/j.issn.1006-7647.2018.02.012 (in Chinese).
    Huang, R., 2009. Mechanism and geomechanical modes of landslide hazards triggered by Wenchuan 8.0 earthquake. Chinese Journal of Rock Mechanics and Engineering, 28(6), 1239–1249 (in Chinese).
    Huang, R., Li, W., 2009. Development and distribution of geohazards triggered by 5.12 Wenchuan Earthquake in China. Science in China Series E: Technological Sciences, 52(4), 810–819. https://doi.org/10.1007/s11431-009-0117-1.
    Hynes-Griffin, M.E., Franklin, A.G., 1984. Rationalizing the Seismic Coefficient Method (Miscellaneous Paper GL-84-13). US Army Corps of Engineers, Vicksburg.
    Indian Institute of Technology Kanpur and Gujarat State Disaster Mitigation Authority (IITK-GSDMA), 2005. Guidelines for Seismic Design of Earth Dams and Embankments. IITK-GSDMA, Kanpur.
    Kontoe, S., Pelecanos, L., Potts, D., 2013. An important pitfall of pseudo-static finite element analysis. Computers and Geotechnics, 48, 41–50. https://doi.org/10.1016/j.compgeo.2012.09.003.
    Kou, H., Li, N., Guo, S.F., Advances in failure mechanisms and stability of rock slopes under earthquake action. Advances in Science and Technology of Water Resources, 38(4), 81-88. https://doi.org/10.3880/j.issn.1006–7647.2018.04.014 (in Chinese).
    Liu, H.L., Fei, K., Gao, Y.F., 2003. Time history analysis method of slope seismic stability. Rock and Soil Mechanics, 24(4), 553–556 (in Chinese).
    Loaiciga, H.A., 2015. Groundwater and earthquakes: Screening analysis for slope stability. Engineering Geology, 193(2), 276–287. https://doi.org/10.1016/j.enggeo.2015.04.027.
    Loukidis, D., Bandini, P., Salgado, R., 2003. Stability of seismically loaded slopes using limit analysis. Geotechnique, 53(5), 463–479. https://doi.org/10.1680/geot.2003.53.5.463.
    Morgenstern, N.R., Price, V.E., 1965. The analysis of the stability of general slip surfaces. Geotechnique, 15(1), 79–93. https://doi.org/10.1680/geot.1965.15.1.79.
    Newmark, N.M., 1965. Effects of earthquakes on dams and embankments. Geotechnique, 15(2), 139–160. https://dx.doi.org/10.1680/geot.1965.15.2.139.
    Parise, M., Jibson, R.W., 2000. A seismic landslide susceptibility rating of geologic units based on analysis of characteristics of landslides triggered by the 17 January, 1994 Northridge, California earthquake. Engineering Geology, 58(3), 251–270. https://doi.org/10.1016/s0013-7952(00)00038-7.
    PEER. 2010. PEER Ground Motion Database. http://peer.berkeley.edu/peer_ground_motion_database
    [Retrieved Apr. 4, 2017].
    Seed, H.B., 1979. Considerations in the earthquake-resistant design of earth and rockfill dams. Geotechnique, 29(3), 215–263. https://doi.org/10.1680/geot.1979.29.3.215.
    Shinoda, M., 2015. Seismic stability and displacement analyses of earth slopes using non-circular slip surface. Soils and Foundations, 55(2), 227–241. https://doi.org/10.1016/j.sandf.2015.02.001.
    Stewart, J.P., Blake, T.F., Hollingsworth, R.A., 2003. A screen analysis procedure for seismic slope stability. Earthquake Spectra, 19(3), 697–712. https://doi.org/10.1193/1.1597877.
    Wen, B., Wang, S., Wang, E., Zhang, J., 2004. Characteristics of rapid giant landslides in China. Landslides, 1(4), 247–261. http://doi.org/10.1007/s10346-004-0022-4.
    Yang, X.G., Chi, S.C., 2014. Seismic stability of earth-rock dams using finite element limit analysis. Soil Dynamics and Earthquake Engineering, 64, 1–10. https://doi.org/10.1016/j.soildyn.2014.04.007.
    Zhao, L.H., Cheng, X., Zhang, Y., Li, L., Li, D.J., 2016. Stability analysis of seismic slopes with cracks. Computers and Geotechnics, 77, 77–90. https://doi.org/10.1016/j.compgeo.2016.04.007.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (614) PDF downloads(405) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return