Water Science and Engineering 2010, 3(3) 313-320 DOI:   10.3882/j.issn.1674-2370.2010.03.007  ISSN: 1674-2370 CN: 32-1785/TV

Current Issue | Archive | Search                                                            [Print]   [Close]
Information and Service
This Article
Supporting info
PDF(199KB)
Reference
Service and feedback
Email this article to a colleague
Add to Bookshelf
Add to Citation Manager
Cite This Article
Email Alert
Keywords
Beidaihe International Yacht Club
numerical simulation
sediment deposition thickness Beidaihe International Yacht Clubl numerical simulationl sediment deposition thickness
Authors
LUO Cheng-Gang
PubMed
Article by Luo,C.G

Numerical simulation of sediment deposition thickness at Beidaihe International Yacht Club

Cheng-gang LU1, Zhou-hu WU1, Guo-feng HE1, Jie ZHU1, Gui-yong XIAO2

1. School of Environmental and Municipal Engineering, Qingdao Technological University, Qingdao 266033, P. R. China
2. Qingdao Yuping HAVR Engineering Co., Ltd., Qingdao 266033, P. R. China

Abstract

The finite element method (FEM) was used to simulate sediment hydrodynamics at the Beidaihe International Yacht Club, and a two-dimensional model was established. The sediment movement and deposition were analyzed under many tidal conditions in conjunction with the hydrological regime of the Daihe River. The peak value of the sediment deposition thickness appears in the main channel and around the estuary. The sediment deposition thickness is essentially constant and relatively small in the project area. The sediment deposition thickness in the main channel, in the yachting area, and around the hotel is greater than the other areas in the project. Regular excavation and dredging of the channel is the best measure for mitigating the sedimentation.

Keywords Beidaihe International Yacht Club   numerical simulation   sediment deposition thickness Beidaihe International Yacht Clubl numerical simulationl sediment deposition thickness  
Received 2010-01-08 Revised 2010-07-09 Online: 2010-09-27 
DOI: 10.3882/j.issn.1674-2370.2010.03.007
Fund:
Corresponding Authors: Lu Cheng-gang
Email: luchenggang008@126.com.cn
About author:

References:

Hu, D. C., Zhang, J. H., Zhong, D. Y., and Ma, T. 2009. Validity verification of methods for determining bedload grain size distribution. Journal of Hydraulic Engineering, 40(3), 274-280. (in Chinese)
Letter, J. V., Jr., Roig, L. C., Donnel, B. P., Thomas, W. A., McAnally, W. H., and Adamec, S. A., Jr. 1998. Users Manual for SED2D-WES Version 4.3 Beta: A Generalized Computer Program for Two-Dimensional Vertically Averaged Sediment Transport. Vicksburg: U. S. Army Corps of Engineers Waterways Experiment Station Coastal Hydraulics Laboratory.
Lin, B, N. 2006. Introduction to mathematical model for scouring and silting of suspended sediment in river. Journal of Hydraulic Engineering, 37(12), 1523-1524. (in Chinese)
Liu, Y. 2005. A new Crank-Nicholson difference scheme for convection-diffusion equations. Journal of Mathematics, 25(4), 463-468. (in Chinese)
Lu, Y. D., and Sun, J. Z. 1997. Analysis of factors of coastal erosion and silting in Qinhuangdao region. Marine Geology and Quaternary Geology, 17(4), 101-107. (in Chinese)
Pang, C. G., and Yang, Z. S. 2000. Numerical experiment of basic controlling parameters of sediment density current at the Yellow River estuary. Journal of Sediment Research, (5), 68-72. (in Chinese)
Shen, G. Q., Zhang, Y. F., Qu, S. J., and Shang, H. X. 2008. Influence of flood wave type on sediment transport in lower reaches of Yellow River. Journal of Hydraulic Engineering, 39(1), 7-13. (in Chinese)
Wang, Q., and Zhang, J. 1999. Hydrologic Manual of Qinhuangdao City. Hebei: Surveying and Mapping Institute of Geological Prospecting Bureau of Hebei Province.
Zhang, N. 2007. Study on Numerical Simulation and Risk Assessment of Nan Si Xiaji Lake and Influence of Constructed Wetland on Xinxue River Flood Level. M. E. Dissertation. Qingdao: Qingdao Technological University. (in Chinese)

Similar articles
1.

Zheng Jinhai1; H. Mase2; Li Tongfei1

.

Modeling of random wave transformation with strong wave-induced coastal currents

[J]. Water Science and Engineering, 2008,1(1): 18-26
2.Yong FAN.Application of 2-D sediment model to fluctuating backwater area of Yangtze River[J]. Water Science and Engineering, 2009,2(3): 37-47
3.Ning HE;Zhen-xing ZHAO.Theoretical and numerical study of hydraulic characteristics of orifice energy dissipator[J]. Water Science and Engineering, 2010,3(2): 190-199
4.Ying-wei SUN, Hai-gui KANG*.Application of CLEAR-VOF method to wave and flow simulations[J]. Water Science and Engineering, 2012,5(1): 67-78
5.Shu-he WEI; Liao-jun ZHANG.Vibration analysis of hydropower house based on fluid-structure coupling numerical method[J]. Water Science and Engineering, 2010,3(1): 75-84
6.Yan ZHANG; Jian-fu SHAO.Elastoplastic cup model for cement-based materials[J]. Water Science and Engineering, 2010,3(1): 102-112
7.Ze-gao YIN;Xian-wei Cao; Hong-da SHI; Jian MA.Numerical simulation of flow past circular duct[J]. Water Science and Engineering, 2010,3(2): 208-216
8.Li-ping CHEN, Jun-cheng JIANG.Experiments and numerical simulations on transport of dissolved pollutants around spur dike[J]. Water Science and Engineering, 2010,3(3): 341-353
9.Jun CHEN, Hong-wu TANG.Multi-approach analysis of maximum riverbed scour depth above a subway tunnel[J]. Water Science and Engineering, 2010,3(4): 431-442
10.Rasool GHOBADIAN; Kamran MOHAMMADI.Simulation of subcritical flow pattern in 180o  uniform and convergent open-channel bends using SSIIM 3-D model[J]. Water Science and Engineering, 2011,4(3): 270-283
11.Lin HAN; Zi-ming ZHANG; Zhi-qiang NI.Application of SSOR-PCG method with improved iteration format in FEM simulation of massive concrete[J]. Water Science and Engineering, 2011,4(3): 317-328

Copyright by Water Science and Engineering